Please note: The insert is designed to fit the 1.5 version of the game with box dimensions listed above. The insert works fine with the older 1.3 version, but the box is approximately 7 mm lower and in this case the lid will not close fully flush. Insert designed for game with external box dimensions of 62.8 x 32.5 x 13.5 cm.
This Campaign 2 insert is designed to be compatible with Kingdom Death Monster® expansions, providing space for 560 more standard sized cards and 300 more gear cards. The insert is intended to be used together with the FS-KDM insert, and together they will fill the game box.
Here you can see the card trays inside the game box.
The trays are stored on the right hand side of the box. There is a slot at the top where the settlement location cards are stored vertically in a slot next to the trays.
These are all the trays that come with this expansion insert. There are four trays for the standard sized cards and two trays for the gear cards. There is space for all cards to be sleeved with quality sleeves.
The gear card trays can be used on in one of two ways: either for gear cards, or placed sideways for standard cards. The latter option can be used if you are storing your gear cards in a binder. If the trays are used for the standard sized cards then there is storage space for a total of 760 sleeved cards in the whole FS-KDM+ insert.
When this insert is combined with the FS-KDM insert they fill the game box. When both inserts are used the total number of sleeved standard cards is increased to 1,860 and the gear cards to 740. With gear cards in a binder folder the total standard cards is increased to 2,250.
This image shows the two inserts lowest layers side by side, with the whole bottom of the box filled with card trays. The main game board goes on top of these to create a flat platform for the trays above.
Here all the trays, boards and data sheets are added on top of the insert card trays underneath. On the right hand side there is space left for a binder folder to be added should you want to store your gear cards in binder sleeves.
This product consists of a flat-pack of 4 Evacore sheets. The trays require assembly, which is quick and fun, using ordinary PVA glue. Detailed instructions are included in the package.
For general assembly tips click here.
Weight: 5o0 gr
Packaging dimensions: 25.5 x 35.5 x 2.2 cm
Material: Evacore sheets